• A box low-cost house cast to look beautiful and modern
  •  
    LCM was developed in Europe over 60 years ago and has since then been on the international market for more than 20 years. LCM has been used in the building industry for well over one hundred thousand apartments and houses in over 40 different countries. Machines, foaming agent, training and technology transfer
    Foam Concrete
    Introduction

    About LCM
    Application
    Benefits
    FAQ
    SIRIM QAS Test Reports and Certifications
    Charts
    Foam Generator, LCM Mixer and PUMPS
    Casting of Wall
    Casting a House
    LCM Formwork System
    Blocks & Panels
    Road Barriers & Sound Barriers
    Pavers & Cornices
    Undulating problem solving with LCM Bridge Approach system
    Highrise External Wall Panels
    Screeds, Floor Stampings & Road Base
    Video
    Conclusion
    Contact

    > Blocks & Panels

    Tel : +609- 5654070 Fax : +6-09-5162913
    Email : lightweightconcrete@yahoo.com


    Partnership Official Website : www.lcm.my

    As LCM innovative lightweight concrete densities can be control, we are able to make blocks and panle of verious shapes and sizes as well as density ranging form 600 kg/m3 to 1600 kg/m3. For exampl;e a 100mm thick (4") blocks of size 200mm x 450m ( 8" x 18") it can be made to 6 kg per ( if using 600 kg/m3 dry density cement only mix), 7 kg, 8kg, 9 kg ( if at 900 density) up to 16 kg per block if at 1600 density ( cement and fine sand mix for those above 1000 density)

           
           
           
    Manufacturing of block panels to any require size with density ranging from 500 kg / m3 to 1800 kg /m3. Metal, wood or plastic mould could be used. Oiling of mould is compulsory. After years of experimental and testing, we are in a position to advise or to supply you with the perfect mould. We advised customer to manufacture 300mm x 600mm panels, thickness varies from 75mm to 150mm. It's the perfect wall because of its excellent sound and heat insulation properties.

    Panel with Density of 600 to 800 kg / m3 can be to size as large as 300mm x 1200mm x 100mm thick can still be lifted by a single worker. It can float on water.

    Purpose LEGO type block panel in which a steel bar as well as wiring conduit or water pipe can be inserted and fill again with lightweight concrete to make a very strong load bearing wall or retaining wall. It can be cast to any require size.



    Laying of load-bearing block with hollow section infill again with Lightweight Concrete and coated with a single a layer of skim-coating finishing. No columns and beams are required.



    LCM - All kinds of blocks and panels can be cast with Lightweight Concrete Methods. Densities of blocks and panels can be adjusted to between 900 kg/m3 to 1800 kg/m3.



    Compressive strength of LCM is between 1 MPa to 30 MPa. It has good heat insulation properties and is a very good acoustic material. Densities lower then 800 actually floats in water. Panels can be cast with stone effect finish appearance. Lightweight panels as thin as 25 mm thickness and mix with pigments can make decorative colour instead of normal cement colour appearance.



    Copyright © 2010 LCM - Also Known as LCM. All rights reserved. Powered by LCM |